en
My Requests
Following
I'D LIKE TO CHAT WITH A REPRESENTATIVE
I'D LIKE TO SUBMIT A SUPPORT REQUEST
Submit a Request
Contact Us
Is your question unavailable?
Chat with a Representative
Submit a Request
Attachments:

Logo

Zyxel VSG 1432: Physical Setup

The following instructions will help guide you through the physical setup of your ZyXel VSG 1432 modem.

  1. Unpack modem/router.
  2. Connect one end of the supplied phone cable into modem/router and the other end into the phone jack.
  3. Connect one end of the supplied Ethernet cable to one of the Ethernet ports of your modem/router and the other end into the Ethernet port of your computer.
  4. Plug the power adapter into the pack of the modem/router and the other end into an electrical outlet or surge protector.
  5. The modem's lights will begin to blink. Wait for the DSL WAN light to turn on steady, this normally takes between 30 seconds and two minutes.

To use your internet service you will also need to setup the modem with one of the following modem configurations:

Note: The VDSL setup option should only be used if you are on a VDSL package. The ZyXel VSG1432 is NOT compatible with VDSL in Ontario and Quebec.

Have more questions? Submit a request
Powered by Zendesk