en
My Requests
Following
I'D LIKE TO CHAT WITH A REPRESENTATIVE
I'D LIKE TO SUBMIT A SUPPORT REQUEST
Submit a Request
Contact Us
Is your question unavailable?
Chat with a Representative
Submit a Request
Attachments:

Logo

SmartRG 505N: Modem Setup (ADSL) (Bridged)

These instructions will result in your SmartRG SR505N modem being setup in bridged mode for an ADSL connection. This configuration should be used if you intend to make use of your own stand-alone router.

Note: This configuration will not work with any of our VDSL packages. VDSL packages have upload speeds of 10Mbps.

  1. Open a web browser (Internet Explorer, Firefox, Chrome, Safari, etc.) and navigate to the modem's web interface. (http://192.168.1.1)
  2. Click on the Advanced Configuration link. (Top right corner)
  3. Enter the Admin username and password. (Both of these are admin by default)
  4. Click on the Advanced Setup link.
  5. Click on the WAN Service link.
  6. If there is anything present in the Wide Area Network (WAN) Service Setup table, check the Remove box(es) and click the Remove button.
  7. Click on the Layer2 Interface link.
  8. Click on the PTM Interface link.
  9. If there is anything present in the DSL PTM Interface Configuration table, check the Remove box(es) and click the Remove button.
  10. Click on the ATM Interface link.
  11. If there is anything present in the DSL ATM Interface Configuration table, check the Remove box(es) and click the Remove button.
  12. Click the Add button.
  13. Enter 0 for the VPI field and 35 for the VCI field.
  14. Check the Path0 (Fast) and Path1 (Interleaved) boxes. These boxes are not present if your SmartRG has the latest firmware.
  15. Set the DSL Link Type to EoA
  16. Set the Encapsulation Mode to LLC/SNAP-BRIDGING
  17. Set the Service Category to UBR Without PCR
  18. Click Apply/Save.
  19. Click the WAN Service link.
  20. Click the Add button.
  21. Select the appropriate WAN Service Interface Configuration value from the drop down list, this should be something along the lines of atm0/(4_0_35).
  22. Click Next.
  23. Select Bridging.
  24. Set the 802.1P Priority field to -1.
  25. Set the 802.1Q VLAN ID field to -1.
  26. Click Next.
  27. Click Apply/Save (WAN Setup - Summary page)

Congratulations, your modem has now been setup for bridge mode on an ADSL connection. If you do not have a router, please use the following directions to setup a PPPoE connection on your computer.


WINDOWS XP:
https://teksavvy.zendesk.com/hc/en-us/articles/200268815-How-to-Create-a-Broadband-Dialer-on-Windows-XP

WINDOWS VISTA/7:
https://teksavvy.zendesk.com/hc/en-us/articles/200343024-How-to-Create-a-Broadband-Dialer-on-Windows...

MAC OSX TIGER:
https://teksavvy.zendesk.com/hc/en-us/articles/200325510-How-To-Create-a-Broadband-Dialer-on-OSX-Tig...

MAC OSX LEOPARD:
https://teksavvy.zendesk.com/hc/en-us/articles/200268805-How-to-Create-a-Broadband-Dialer-on-OSX-Leo...

Have more questions? Submit a request
Powered by Zendesk