en
My Requests
Following
I'D LIKE TO CHAT WITH A REPRESENTATIVE
I'D LIKE TO SUBMIT A SUPPORT REQUEST
Submit a Request
Contact Us
Is your question unavailable?
Chat with a Representative
Submit a Request
Attachments:

Logo

SpeedTouch 585: Modem Setup (Routed Mode)

The SpeedTouch 585 can be setup in routed or bridged mode. Routed mode should be used when you wish to use the full functionality of the ST585 modem (4 ports + wireless).

  1. Navigate to the modem's web interface. (http://192.168.1.254)
  2. If prompted, enter your administrative username and password.
  3. Click on the Thompson Gateway button. (Left hand side of page.)
  4. Click the Set Up link. (Found below Pick a task...)
  5. Click Next.
  6. Select Routed PPP then click Next.
  7. Set the VPI/VCI to the correct value for your region.
    • Ontario/Quebec: 0/35
    • Alberta/BC: 0/33
    • Nova Scotia: 0/35 or 1/0
    • Nefoundland: 0/34, 0/35, 0/36, or 8/36
    • PEI: 0/35
    • New Brunswick: 0/34 or 0/35
  8. Set the Connection Type to PPP over Ethernet (PPPoE).
  9. Click Next.
  10. Enter your DSL username into the User Name field.
  11. Enter your DSL password into the Password and Confirm Password fields.
  12. Click Next.
  13. Enter your desired administrative password settings then click Next. (It is highly recommended to leave this as is.)
  14. Click Start. (The configuration process could take up to a minute)
  15. Click Finish.
Have more questions? Submit a request
Powered by Zendesk