The Hitron ARIA 2210 is a mesh extender, also known as a mesh Wi-Fi extender or mesh network extender that can help improve the wireless coverage in your home Wi-Fi Network. Please note that this mesh extender is currently compatible only with Hitron Wi-Fi internet gateways. A DOCSIS 3.1 Hitron cable modem router with Wi-Fi is required to order this extender with us at this time. This compatibility ensures optimal performance and seamless integration with your existing home network, providing the best possible Wi-Fi coverage and reliability.
Hardware Specifications
- WiFi 6 (802.11ax), Dual Band (5GHz + 2.4GHz), AX1800 class 2×2 MIMO
- Two Gigabit ethernet ports
- Power Adapter: 12V – 1.5A
Wireless Network Details
- This device inherits your wireless network name, password and all control configurations from your Hitron Wi-Fi internet gateway.
How to Factory Reset
- Use a dull pin or paperclip (other similar tools may be available) to press and hold the button in the “Reset” pinhole for ~10 seconds, until the status light cycles between red, green, and blue, then release.
- The reset button is on the very back, beside the LAN 1 port.
Troubleshooting Information
| Colour | LED State | Meaning |
| Green | Slow Pulsing | Booting |
| Green, White | Alternating | Attempting to pair with gateway/receiving settings from the gateway |
| White | Slow Pulsing | Ready to begin pairing |
| White | Solid | Paired and connected to the gateway (normal operation) |
| Red, White | Alternating | Searching for paired gateway |
| Amber | Solid | Wireless connection to gateway is weak |
| Red, Green, Blue | Cycling | Executing factory reset |
| Cyan, White | Alternating | Software upgrade in progress (DO NOT power off or disconnect from paired gateway during this pattern) |
| Cyan | Solid | Connected to the gateway via ethernet, but extender WiFi radios are disabled |
| Red | Solid | Hardware Failure |
Gallery
