The Hitron ARIA 2210 is a mesh extender, also known as a mesh Wi-Fi extender or mesh network extender that can help improve the wireless coverage in your home Wi-Fi Network. Please note that this mesh extender is currently compatible only with Hitron Wi-Fi internet gateways. A DOCSIS 3.1 Hitron cable modem router with Wi-Fi is required to order this extender with us at this time. This compatibility ensures optimal performance and seamless integration with your existing home network, providing the best possible Wi-Fi coverage and reliability.
Table of Contents
Hardware Specifications
WiFi 6 (802.11ax), Dual Band (5GHz + 2.4GHz), AX1800 class 2x2 MIMO
Two Gigabit ethernet ports
Power Adapter: 12V - 1.5A
Wireless Network Details
This device inherits your wireless network name, password and all control configurations from your Hitron Wi-Fi internet gateway.
How to Factory Reset
Use a dull pin or paperclip (other similar tools may be available) to press and hold the button in the "Reset" pinhole for ~10 seconds, until the status light cycles between red, green, and blue, then release.
🚩The reset button is on the very back, beside the LAN 1 port.
Troubleshooting Information
Colour
LED State
Meaning
Green
Slow Pulsing
Booting
Green, White
Alternating
Attempting to pair with gateway/receiving settings from the gateway
White
Slow Pulsing
Ready to begin pairing
White
Solid
Paired and connected to the gateway (normal operation)
Red, White
Alternating
Searching for paired gateway
Amber
Solid
Wireless connection to gateway is weak
Red, Green, Blue
Cycling
Executing factory reset
Cyan, White
Alternating
Software upgrade in progress (DO NOT power off or disconnect from paired gateway during this pattern)
Cyan
Solid
Connected to the gateway via ethernet, but extender WiFi radios are disabled
Red
Solid
Hardware Failure
Gallery
